General information on the prototyping

Where it is more profitable to order the scale model of home

Recently there has been a steady trend of the order of layouts not in Moscow and St. Petersburg, and in the regions.

There are several reasons.
In Moscow, the price of manufacturing layouts 20-30% more expensive than in the regions, because the salary of Muscovites much higher

Manufacturing layout, this is not a game, but a serious production activities.

For making a good layout requires high-quality imported materials and qualified personnel.

It used high quality materials to get you were only in Moscow. Now they are available over the Internet in any other city in the same way. In addition, many bought directly from abroad.

But salaries in Moscow in three to four times more. Therefore, in order to attract a good specialist manufacturer of layouts should spend much more money than the same manufacturer in any other region of the country.

In the regions often make the layout better than in Moscow, because in that region the best professionals agree to work for less money.

To give a lower price, in Moscow prototyping workshops are forced to reduce the salaries of their employees. While skilled professionals do not want to work for less money and go into other areas of activity.

The manufacture of models is a complex process which requires high qualification. Needless to say that good specialists of this sector are willing to offer a job in other industries. And the firm manufacturing layouts in Moscow constantly experiencing problems with employee turnover and the need for their learning. This is often referred to on forums and social networks.

Unlike Moscow, regional firm for the same money making layouts work best qualified staff. This is often representatives, past school work in the defence institutions and industries. They are familiar with vysokoeffektivnyi technologies and are able to apply for as many modern technological equipment and design tools (CAD/astpp) which many Metropolitan manufacturers do not even guess.

It should be noted another trend. To the price of the layout remained acceptable, capital producers layouts are forced to use cheaper materials. Therefore, in contrast to Moscow, where most of the money spent on the salary of their employees, regional producers layouts often and easy to use high quality imported imitation materials. Therefore, even budget models look realistic, picturesque and attractive.

Delivery in Moscow and delivery from any region was much the same. Shipping cost from Kursk in Sterlitamak is only 800 rubles.

Shipping cost from any city in the Russian Federation today is a completely reasonable money. Quality work professional transport companies is higher than the work of couriers in Moscow.

The confidence of clients in delicate packing, reliable transportation layouts, careful unloading and unloading - today it is a significant plus in regional manufacturers layouts.

When this layout will be Packed in doll and another top will be an additional crate.
Thanks to the Internet to place orders and monitor production in the region is even simpler than in Moscow.

To place an order for the manufacture of models necessary drawings, pictures, sketches, and descriptions of various kinds. However now it is not necessary to come to the office, to be exempt Manager and then to sit with him for a whole day only to find out exorbitant cost of manufacturing layout in Moscow. Besides, not spoiled regional manufacturer models more awe and respect to their customers than the capital producers.

Now it is enough to call a regional manufacturer of layouts and send all required documents by e-mail. Thus, usually, regional manufacturers are much less demanding in the quality and quantity of the source data. Due to high qualification, they require a much smaller list of source data.

Thanks to the development of digital photography the customer and the contractor can easily share information directly with their jobs. So it does not matter whether You layout in Moscow or in another region of the country, because You see your layout even without having to spend valuable time on the departure of the employee.

Thus, to order a scale model, not in Moscow and in the regions of the Russian Federation largely appropriate.

How to organize the production of scale models

The information provided here is not a direct reflection of economic activity prototyping workshop Mattarozzi.Of the Russian Federation.

Here is shown the difficulties that have been overcome with time, solving the optimization process of the production of scale models.

The data can be useful for start-UPS in the production of scale models to get a real view of activity in this area.

The chart presents the total costs of resources in the real business plan in the manufacture of large-scale models.

The business plan making scale models.

Today on the Internet you can find a lot of business plans on making layouts.

Unfortunately, in the vast majority, these business plans are created by Amateurs for the purpose of attracting more readers to your site, or to sell drivel for the money.

In fact in the theory of the organization of production in the manufacture of large-scale models are classic and unusual details.

A classic is something that can teach a teacher who has the ability to teach, i.e., the person with pedagogical skills.

But the real strategic media skills is a master. Unlike the teacher, the master instead of the ability to teach has the skills they need to succeed. I.e. to teach the real master will not.

Therefore, the organization of production layouts should be noted that all information publicly available is incomplete.

Most often, this information is created by a person who is not possessing the knowledge and skills of the wizard tries to impress his own importance. He only participated in the stages of some processes, and these processes were posted on the Internet. It is easy to learn to stick or cut. But it's all the level of the third class class work.

Yes, the techniques of gluing, cutting parts are an integral part of the manufacturing process layouts.

However, as mathematicians would say, it is a necessary but insufficient condition for the organization of production.

So guy Kawasaki in his work on startups perfectly describes the main mistake beginners "businessmen" who take money in the debt or loan, arrangement of space, buy equipment, advertise and only then realize that the money would not come to him as a conveyor belt. In the usual case, these costs are not commensurate with future income. This leads to debt, and the collapse has not yet started production.

If you have understood how to do the layout from the Internet, then it means that ALL OTHERS already understand how to do the layout.

And absolutely it is important to understand that those who are already working in this market, make it faster or better. So that others behind them are not kept.

Imagine yourself on the autobahn with the scooter. It looks like the owner of a 3d printer before modern company producing layouts.

For example, in the mock-up workshop Mattarozzi.The Russian Federation uses its own technology calendar and resource planning is integrated with a method of structural-functional analysis (IDEF0 diagrams and Gantt chart) . This integrated system has a scientific basis and proven effective application when planning in the workforce have simultaneously the characteristics of creative and production data.

And this is not the only successful solution LLC "Laboratory of Spatial Design, which provides a significant advantage in the market of production layouts.

On the Internet many beautiful stories about the magical abilities of 3d printer - but this is nothing but a ploy equipment vendors.

Website development costs 10 000 rubles. Equipment worth hundreds of thousands. It is difficult if the seller of the equipment to create multiple sites on the supposedly existing company manufacturer of layouts that are great make use of their 3d printers?

So imagine that you buy a scooter in the hope to keep up with the company, which has planes.

This organization of production begins not with the technology, but with the economy.

So the first thing you should understand about the whole spectrum of works included in the model business process printing.

Below is compiled such a list.

1. Advertising, search orders, payments, terms of reference, contract accounting.

The fact is that when the number of firms on the market of production layouts, few customers will pay money to a private entity.

You need a legal entity, the ability to organize the advertising budget to be able to develop the terms of reference, to draw up a contract and bookkeeping.

Most firms customers require copies of financial statements, certified by the tax inspection and statutory documents.

The calculations have to constantly have to cost the layout does not outweigh the amount of the contract, including taxes, and other possible future contingencies for manufacturing.

Total listed costs for these works amount to about 27% (i.e., one third of all the activities you will find orders and counting).

2. Design and 3D modeling of parts of the layout, the use of automation.

If You think that You will get the advantage if you know how to use 3d max or something like that, you have to Wake up.

The magical world of printing has long been impossible without automation. And it hardened survivors in the competition, the inhabitants have long been highly skillful computer programs, 2d, and 3d printers, cutting plotters, and God knows what kind of equipment, but at the same time as Alice in Wonderland - they have to run just to keep up and to remain at least at the place.

Because the layout is unique technological product and should be done in a few days, so that even negotiations with helpers is a luxury.

In General, emotional and physiological burden on the soul of the party process, production layouts like biathlon. All run on time, loads of crazy, one slip + ten laps. To replace an employee not just anyone. Because people, in principle, capable of performing such work in such a variety of specialties and with this level of professionalism is not there. They usually demand a much more lucrative and less demanding activities.

And for such sum and on such conditions it is possible to employ only a beginner and learn the most. And this years.

Costs are also about 27%.

3. Purchase of materials

Made of dyed sawdust and foam mock-up workshop can't do layouts.

Firstly because the customer, with the words "I saw it differently", will require the money back, sue and will ruin the penalties.

Secondly, if you do cheap production layouts will not be able to contain any of specialists and working even the head is not enough for taxes and food.

Thirdly, it will make a portfolio so disgusting that customers will all continue to work around your site a party, and advertising will not attract and repel.

So you need to buy best quality imitation materials and to use them more carefully.

The cost of materials is about 32%.

4. The costs of the use, repair and maintenance, software configuration

To a 3d printer was printing he needs to set the program to charge a consumable material, to monitor the process.

This is the cost of using this equipment.

If you read not only enthusiastic calls of vendors and the feedback from real users, the 3d printer needs cleaning, adjustment, lubrication.

In the event of a failure (which is unfortunately not uncommon), go out of order in the best case, easily replaceable parts that you can buy and replace myself.

Otherwise you will need expensive repairs.

The computers also come, infected by viruses, software management equipment requires adjustment, checking to avoid errors.

Otherwise - again, failure, failure, failure time.

Equipment costs make up about 16%.

5. The actual manufacturing layout in nature

Here you can specify yourself as an advantage to be able to glue the parts.

However, in addition: manufacturer podmenik, Plexiglas boxes, shipping boxes, causing the terrain, her Majesty electronics and much much more.

And all this at you, just 9% of all expenses. I.e. only 9% of the resources (labor, time, money and so forth.) you have available to spend on actually making a layout.

How to allocate more resources?

Easily have more clients. To get more customers to spend more on point 1. by cutting spending on other items. Sit down to think about how to do this once will do the layout.

A squirrel in a wheel.

And why do you think big business is not in production layouts?

Workshop on construction of scale models

In the past the mock-up workshop worked in a supporting role in the architectural office.

Not accidentally, many architects the old fashioned way are designers with a great deal of indulgence.

However, in today's world of high competition, nothing can compare with the layout on the degree of impact on the human imagination.

Changed the role of scale model buildings.

If earlier model workshop made a scale model exclusively for the realization of the ambitions of the architects and layouts were made mostly of Styrofoam and cardboard, today the layout required for new vital goals.

First mock-up workshop should be able to meet the investment layout.

It is made to raise money for the construction. The objective of such a large-scale model is to create the illusion that all buildings and structures already built.

Model workshop Mattarozzi.The Russian Federation fulfills the following layouts with special care, often on the layout there are elements of landscape design, water features, green spaces.

This scale model is required to Wake up in the imagination of the presentation must be wonderful to live in such a wonderful place.

If the model technology is the main goal to focus the viewers attention on the main features of this project.

Here in the course are the best materials, led lights, and a well-planned system switchover.

To survive the fierce competition of modern mock-up workshop should be equipped with the latest technology.

So workshop MaketyRossii.RF works on the basis of LLC "Laboratory of Spatial Design" - one of the developers of software add-ons for modern systems 3d modeling. So the mock-up workshop has not only production, but also an impressive laboratory facilities for research in the field of creation of simulation models, technological innovation, exploration and development of its own new methods of prototyping.

Therefore, the layouts are the way to best way to solve the problems posed by the customer.

Manufacture of architectural scale models of buildings Manufacturing model of a 3d model, You can order in OOO "Laboratory of Spatial Design"

Video about our large-scale models

Расчет стоимости макета из картона в домашних условиях

В современных экономических условиях чтобы сэкономить мало что-то уметь делать самому.

Мультгерой времен дефицита "Самоделкин" - сегодня это классический типаж человека, постоянно пополняющего многомиллионную когорту неудачников.

Все больше и больше людей приходят в интернет и удивляются широте информации и кажущейся простоте легкого заработка.

Однако следующий пример показывает во сколько реально выливаются для обычного человека затраты на изготовление самого что ни на есть тривиального изделия.

Допустим необходимо изготовить макет самого простого домика с трубой.

У него есть крыша, труба, стены с окнами.

Необходимо иметь эскиз здания с реальными размерами.

Выбрать масштаб. И нарисовать этот же эскиз с новыми размерами, уменьшенными в соответствии с масштабом.

Далее действия, казалось бы очевидны. И кажется что затраты вовсе должны быть незаметны. Ведь мы же делаем макет дома сами у себя дома )))).

Однако все ли так гладко и дешево как видится на первый взгляд?

Расчет стоимости 1 своего нормочаса.
Размер заработной платы наруки        30000    руб/мес       
Зарплата с подоходным налогом 13%        33900    руб/мес       
С налогом, который платит работодатель в пенсионный фонд набегает уже  42036    руб/мес       
Количество рабочих часов в месяце        168    час       
Фактическая стоимость 1 нормочаса        250    руб/час

Расчет стоимости задействования помещения (квартиры)
Стоимость ЖКУ за месяц        5000    руб/мес       
Количество квадратных метров в квартире        50    кв.м.       
Стоимость 1 часа задействования 1 кв.метра квартиры        0,595238095    руб./час       
Количество задействованных метров квартиры        5    кв.м.       
Стоимость 1 часа помещения        3    руб./час

Так как мы решили сэкономить а не заработать, то в данной калькуляции не учтены прибыль и расходы на бухгалтерию.

Эти расчеты показывают, что даже изготовление домика с трубой стоит самому себе 1846 рублей.

Вот так экономия.

The production of scale models is a complex engineering process

The modern development of the means of production creates the false impression that the manufacture mastabah models is something of a game.

In the Internet you can find a huge number of fake business plans, wonderful stories and other fictions about the ease of use of the equipment. And allegedly with the help of this equipment as if by magic one button born scale models of buildings and structures.

In fact, the production of scale models is a complex design and technological process in which the participation of specialists of different professions.

False information about the ease of achieving success with the help of certain equipment fetus manufacturers of this equipment.

And it is because of this false representation goes by the wayside, most importantly the complexity of the production of scale models.

One person can do the work of 8 to 12 man hours in one day.

Underlying the complexity scale model is in the General case 2000 labor times. Thus to perform a scale model in a month you need to learn from 8-12, and 80-100 hours a day. Ie 10 times more.

Manufacturers grief business plans do not take into account that every person engaged in the modern production of scale models is already running more than two or three colleagues.

This is due to the high competence in the use of automation.

Virtuosity with a computer, printers, cutting plotters, machine tools, 3d printers, the modern technology of machining and 3d modeling are the components, which are indispensable for the effective application of expert on the team producing the architectural scale model.

Otherwise, the following occurs.

People are deceived information. Namely:

1. Banks advertise loans... - take out a loan. Other people's money, spent easily.

2. The Internet screams - we will create a website and promote it to the top... - man website orders and pays for SEO. Not knowing the Ford spent so much money that simply can not be earned if the customer will come immediately.

3. The Internet screams - order equipment... we have a person buys equipment for the production of scale models. But to produce a scale model should be able to use this equipment, this equipment shall be suitable, effective, require little time for repairs and maintenance, to have cheap consumables and finally to do exactly what will be needed. But usually the first thing you cannot do is to load the equipment. Who's going to do 3d models for this equipment? The production model is the same man-hours. Either by yourself or need to hire an expensive and often capricious specialist.

Another fact - book on the side to make 3d models can also be work. It is necessary to define a problem, to give the drawings to negotiate the price to pay for the work, to take the job... All this man-hours.

4. The customer turned... - you need to calculate the labor costs for manufacturing specific unique products. It too work. The complexity of exact calculation of the cost of the layout from a professional economist, secured the necessary tools - is not one hour. And for what money to feed such a specialist? Next is to enter into a contract, an invoice, accept payment, order and pay for the materials.

5.6.7.8. etc.

This list is long.

However, the conclusion from this is obvious. To order any scale model must take into account that on the market there are too many people who are unable to perform this time-consuming job. And before turning to those who promise to produce an architectural model for a penny, it is better to err and to call in a professional Studio, with a solid portfolio with photos of scale models do not pull off from other sites, and is marked with its own watermarks.

Despite the seeming ease of manufacture scale models is a really complex design and engineering challenge, in which one of the main roles is the economic component.

It is an integrated approach to the activities of the enterprise, the creation of a creative team, able to act quickly and smoothly to fulfill orders accurately and on time, to the model workshop MaketyRossii.RF main focus.

3D printer by itself cannot provide advantages in the production of scale models . Without a strong team of skilled hands and heads is just a toy for printing unnecessary 3d meshes from the Internet.

Prices layouts LabPP.Ru

We - vykokotehnologichnaya company with good laboratory facilities and its own work the software and make sure that our customers do not spend extra money.

Therefore, the cost of the architectural layout - from 5,000 rubles, depending on complexity.

Time frame layout - from 2 days.

Even the photographs or verbal description can be built for you layout. Because first, we construct three-dimensional computer model and sends it in the form of images from different angles to you for approval.

Possible to produce LED backlight, simulations of water and natural phenomena, the installation of cameras at the sites layout (eg on a moving locomotive).

Materials - high quality cast plastic, wood, polystyrene, glass, natural materials are specially stabilized wildlife on German technologies and materials - simulators.

Used in the manufacture of precision equipment and software to create a realistic and complete the appropriate size.

Please apply to the manager of the clusters modeling . It will be the terms of reference, a standard contract and send you for approval.

You can pick it yourself, or we'll send you his transport company.

Work begins when you receive a 40% prepayment. The rest - after the approval of your results and the signing of the Acceptance of work performed.

During the work, we will send you a photo reports on which you can have an idea of future results and timely adjustments to the details.

Each customer receives a gift is one of the excellent jewelry an established jointly with the Italian specialists, our own production (Glass Art Intuition).